Hydraulic rotary harvester

Front-mounted or rear-mounted rake for pruning vines. Ideal for thoroughly cleaning orchards, vineyards, citrus groves, and olive groves.

Caratteristiche

Ideal for thoroughly cleaning up orchards, vineyards, citrus groves, and olive groves after manual or mechanical pruning, it gathers pruning debris, leaves, and dry grass into a swath in the center of the row, ready to be removed or mulched.
For use on flat terrain or gently sloping hills (max 10%), on grassy or tilled ground, preferably dry and compact, or frozen.
Whether mounted on the rear or front, it can be attached to any type of tractor equipped with a hydraulic lift, a standard PTO, a minimum power output of 50 HP, and quick-connect couplings.
Suitable for both pot-based systems (RCE – RCF with long arms) and trellis-based systems (RCCE – RCCF with short arms).
Available in various sizes, based on the width of the systems (140 for systems 3 to 4 meters wide – 170 for systems 4 to 5 meters wide – 200 for systems wider than 5 meters – 250 for systems wider than 6 meters).

It must operate offset to the operator’s right (see the table below).
Hydraulic rotator with a 100cc orbital motor, complete with two hoses with quick-connect fittings.
8-arm reducer with oil-bath helical gears and cam-driven mechanism, two steel forks per arm, screw-type height adjustment, two pivoting cast-iron support wheels, and a parking foot.
Equipped with a plant guard to protect the bark from rubbing against the rim.
Rim height from the ground: min. 46 cm – max. 54 cm.
A lateral-movement jack equipped with a lock valve and two hoses with quick-connect fittings is available upon request.
CE-compliant product accompanied by a declaration of conformity and a user and maintenance manual.

Compila il form e verrai ricontattato al più presto